Introducing Xenith Shadow: The Most Advanced Helmet in the Game

Fitting Guide - Eyeshield


EYESHIELD INSTALLATION

We design the best protective gear in football.

1REMOVE FACEMASK FROM THE HELMET

With a Phillips-head screwdriver, take out all four screws from the facemask clips and remove the facemask. Using the same screwdriver, remove the two screws and T-nuts from the pre-installed eyeshield mounting brackets.

2ATTACH EYESHIELD BRACKETS TO THE FACE

Point the mounting bracket’s circular recess out and away from the facemask. Open the mounting bracket slightly and push bracket onto the bars of the facemask. Place a screw into the front of the mounting bracket, place a T-nut behind it, and tighten to secure the eyeshield to the facemask.

3ATTACH FACEMASK & EYESHIELD TO YOUR HELMET

Push the front clips back into position over the T-nuts on either side of the X logo bumper. Place screw through the clip and into the T-nut to secure. Tighten the top screws first, followed by the screws located on either side of the helmet.

1REMOVE FACEMASK FROM THE HELMET

With a Phillips-head screwdriver, take out all four screws from the facemask clips and remove the facemask. Using the same screwdriver, remove the two screws and T-nuts from the pre-installed eyeshield mounting brackets.

2ATTACH EYESHIELD BRACKETS TO THE FACE

Point the mounting bracket’s circular recess out and away from the facemask. Open the mounting bracket slightly and push bracket onto the bars of the facemask. Place a screw into the front of the mounting bracket, place a T-nut behind it, and tighten to secure the eyeshield to the facemask.

3ATTACH FACEMASK & EYESHIELD TO YOUR HELMET

Push the front clips back into position over the T-nuts on either side of the X logo bumper. Place screw through the clip and into the T-nut to secure. Tighten the top screws first, followed by the screws located on either side of the helmet.

Downloads

Get the gear you need and take the manual on the field with confidence.

Download the manual →